DISASSEMBLY

1. Remove air horn lock washer screws and lift air horn and gasket off
2. Remove discharge check ball and discharge check ball weight by inverting carburetor
3. Remove pump diaphragm housing lock washer screw, pump diaphragm housing, pump spring, and pump diaphragm
4. Remove metering rod diaphragm housing, metering rod spring, metering rod, and metering rod diaphragm. Detach metering rod pin and metering rod from diaphragm.
5. Unscrew metering rod jet
6. Remove main body lock washer screw and gasket from main body and throttle body
7. Remove intake passage plug and intake passage plug gasket
8. Remove pump strainer, and intake check valve
9. Remove float pin and float
10. Remove fuel intake needle, needle seat, needle seat gasket, and intake needle pin, and intake needle spring
11. Remove choke tube bracket lock washer screw, choke tube bracket, and choke spring
12. Remove choke valve plate screw, choke valve plate, and choke shaft and lever
13. Drive out choke shaft plug
14. Remove choke shaft seal washer and choke shaft seal
15. Remove strainer nut, strainer nut gasket, and strainer
16. Remove bleeder tube
17. Remove idle adjustment screw, idle adjustment screw spring, idle adjustment screw dust seal washer, and idle adjustment screw dust seal
18. Remove idle port plug
19. Remove throttlle valve plate screw, throttle valve plate, and throttle shaft and lever