Note: These Aisan rebuild instructions are generic to the Aisan carburetor and may not match your specific carb. Make sure you take lots of pictures when disassembling the carburetor.
Instructions are specifically for our kit K327
1973-79 Corolla 1200
1973 Corolla 1166
1972-70 Corolla 1166
Tip: Take photos along the way so you can refer back if needed.
Tip: Use a cookie sheet to hold the parts. This will keep the small parts from rolling off.
Tip: Save all small parts and clips. Our kits come with all that are necessary but they are easily lost.
Do no soak any plastic, or rubber parts. Soak in Simple Green for 2 hours. Be careful or the Aluminum will get discolored if left too long. Carburetor cleaners from your parts store will also work. Follow the directions on the can.
Wash off all chemical - use hot water if possible.
Blow out all passages with compressed air. Check each passage to make sure the air is going all the way thorough.
Remove the top
