FLOAT SETTINGS

DRY FLOAT SETTING

With the bowl cover held in an inverted position and the float tang resting lightly on the spring-loaded fuel inlet needle, measure the clearance between the edge of the float and the bowl cover. To adjust the clearance, bend the float tang up or down as required.

Adjust both float pontoons equially.

SECONDARY THROTTLE STOP SCREW

1. Back off the secondary throttle stop screw until the secondary throttle plate seats in its bore.
2. Turn the screw in until it touches the tab on the secondary throttle lever.
3. Turn the scre in an additional 1/4 turn for a 2000 or 2300 cc 4cyl engine. For a 2800 cc V-6, turn the screw an additional 3/4 turn.